Break It and Make It: A Glass Fusing Session in Everett

A glass workshop in Everett is a great antidote to routine days. You get a guided Break it and Make it session at FEELartistic Studio, where you’ll design a small fused-glass piece and see it through to firing. It is beginner-friendly, hands-on, and small-group, capped at 6 travelers.

I like that the class is built for first-timers and adults who want permission to be creative again. You start with clear square glass and cutting tools, then work through techniques step-by-step, so you are not guessing what to do next. You also get access to many colored glass options, so your design choices are real, not just theoretical.

One consideration: your artwork is not finished when you leave the studio. The studio fires your piece and schedules it for pickup or shipping later, so plan on waiting before you can actually admire the final fused result.

Key things that make this class a smart pick

• Beginner-first instruction with step-by-step guidance, so you can learn by doing
• A complete small project based on a 6-inch square, not a half-started craft
• Color selection matters since you choose from dozens of transparent and opaque glass options
• Small groups up to 6 people, which helps you actually get attention
• Your piece is fired after class, so you leave with a made plan and a future payoff

Where you’ll go in Everett: FEELartistic Studio

This experience starts at FEELartistic Studio at 10333 19th Ave SE Ste 101, Everett. It is a straightforward meeting point, and you return there at the end. That matters because you can keep your day simple, no complicated transit hopping or timing stress.

The studio is also listed as near public transportation, which is a real advantage if you do not want to fight parking. Plus, this class allows service animals, and most people can participate. In other words, you should not feel like you need special training to join.

Finally, the class size is kept small (maximum 6 travelers). In a hands-on activity, that is not a luxury. It usually means faster help when you have a question, and less standing around watching someone else work.

What you make: a 6-inch fused glass design

The main promise here is simple: you will make a six-inch contemporary fused glass piece. It starts with a six-inch square clear glass base, and you use supplied cutting tools and materials to create your design.

What is good about that size is that it is big enough to feel personal, but small enough to fit into a one-hour-30-minute session. You get real decisions to make, not just a paint-by-number craft. You also get the satisfaction of taking part in both the creative and the technical side, since the class includes the process of breaking and arranging glass, then having the studio handle the firing.

Also, you are working with a mix of transparent and opaque colored glass options. That combination can give your final piece more depth than you might expect from something that is only 6 inches wide. You can keep it airy with transparent colors, go bold with opaque pieces, or mix both.

Step-by-step class flow: from intro to your design plan

The session moves in a clear sequence. It begins with an introduction, then you get your materials and guidance as you work.

Here’s the typical flow you can expect:

1. Introduction at the start

You get brief orientation on the goals of the project and the techniques you will practice.

1. Materials handed out to each participant

You receive a six-inch square clear glass piece plus the cutting tools and supplies needed to build your design.

1. Color selection time

You get access to dozens of colorful glass choices, both transparent and opaque. This is where your design starts to become real.

1. Demonstrations and hands-on instruction

The instructor walks you through techniques, then helps you apply them to your own layout.

1. Break and arrange

You break the glass into small pieces and design your pattern on the flat clear glass base.

You will leave knowing what you made and how it will be handled next. That is an underrated part of craft classes. When you understand the full process, the waiting period feels less like a mystery.

Breaking glass and designing with intention (without overthinking)

The signature activity is the part called Break it and Make it. The idea is that you break your colored pieces into small shapes, then place them on your clear base to form your design.

If you are a beginner, this approach is honestly comforting. Instead of trying to cut perfect shapes, you work with small fragments. That lowers the pressure, and it turns mistakes into potential texture. You also get step-by-step guidance, so you are not trying to invent technique on the fly.

One useful takeaway from what people highlight is the emotional side of the class. Adults often feel like creativity is something they aged out of. This format pushes against that. I like the way the studio invites you to play with color and shape, and the feedback from instructors is part of that.

One review specifically praises Jay for clear instruction. That aligns with what you want in a hands-on class. You do not need a lecture. You need someone to show you the steps, then help you do it.

The color library: transparent and opaque glass choices

You get access to dozens of colored glass options, including transparent and opaque pieces. That sounds basic until you are standing there with your base in front of you, because it changes how you design.

Transparent glass tends to layer and glow in a softer way. Opaque glass tends to give more solid contrast and can act like bold blocks in your design. When you mix both, you can make a piece that feels layered even without complicated carving or painting.

Practical tip: if you feel stuck, pick a simple layout first. Start with a few main colors and decide where your stronger contrast should go. Then fill in with smaller bits. This keeps your project from becoming a last-minute collage.

A small drawback surfaced in feedback: one person wanted more glass colors available. That may not be an issue for most people, since the class is described as offering dozens of choices. But if you are the type who wants a huge wall of options to pick from, go in ready to choose from what is provided.

After class: firing, pickup, or shipping

Here is the key moment that makes this class different from a craft that you finish instantly: the studio fires your flat tile-shaped glass creation after you design it.

That means your work does not emerge polished right there in the studio chair. You leave with your pattern done, and the studio takes over the technical finishing steps. You can expect your piece to be ready for pickup or shipping in a few weeks, based on the class information.

One review also adds an important practical note: your artwork is not finished when you leave, but it can be shipped or picked up. So if you are thinking of this as a last-minute souvenir, plan ahead for the waiting time.

The upside is that firing is what makes fused glass look like fused glass. The final result depends on kiln timing and process, which is not something you want to DIY as a beginner. You are buying that expertise.

Price and value: is $79 worth it?

At $79.00 per person for about 1 hour 30 minutes, this class sits in a reasonable zone for guided studio craft work. What makes the price feel fair is that you are not paying just for a seat. You are paying for:

• Materials provided (including the clear base and supplies)
• Step-by-step instruction during the break-and-arrange process
• Studio time to fire the piece after class
• A small-group environment with maximum 6 participants

You also walk away with more than a single-color craft. You get to work with multiple types of glass (transparent and opaque) and build a contemporary fused design. That choice alone is part of the value. It is also part of why people come back wanting to make more treasures.

If you compare this to casual entertainment that costs similar money but gives you nothing to keep, the value is clearer. You are buying an experience with a lasting object at the end, even if you must wait for the final firing.

Who this class is perfect for (and who should rethink it)

This is a strong match for:

• Beginners who want structure and guidance
• Adults who feel rusty on creativity but want a low-pressure way to play with materials
• Anyone traveling with family members (feedback mentions doing it as a family)
• People who like making something small enough to finish in one sitting, yet interesting enough to feel like real art

It might be less ideal if:

• You need a finished item in your hands the same day. The firing happens after class.
• You are expecting a huge buffet of glass colors. The class includes dozens of options, but one feedback note wished for more variety.

For most people, the waiting period is the tradeoff that makes the final piece look properly fused.

Logistics that affect your day (quick but important)

The session is offered in English, which helps if you want to understand the process clearly. The experience is scheduled as a 1 hour 30 minutes class, so it fits well into a short itinerary.

Weather is listed as a factor for the experience. Even if the workshop is indoors, that can affect whether the studio runs as planned. If you are visiting on a tight schedule, consider booking something with some flexibility.

Finally, the group limit of 6 travelers can make your experience feel smoother. In a breaking and arranging activity, you want space, and you want help when you have questions.

Should you book Break it and Make it in Everett?

I’d book it if you want a hands-on glass experience with actual teaching, not just a place to follow instructions blindly. The combination of beginner-friendly guidance, a clear 6-inch project, and the option to choose from lots of transparent and opaque glass makes it feel like real creative work.

Also, I think the small group size is a big part of why the class scores well. When someone like Jay provides clear instructions, it changes the whole vibe. You can relax into the process, knowing you are not stuck figuring it out alone.

Only hesitate if you hate waiting for results. Your fused piece takes firing time and then needs pickup or shipping later, usually in a few weeks. If that timing works for you, this is a fun, meaningful souvenir-making stop in the Everett area.

FAQ

How long is the glass fusing session?

The class runs about 1 hour 30 minutes.

What can I make during the class?

You will create a six-inch square contemporary fused glass piece.

Is the class suitable for beginners?

Yes. It is open to all and is designed for beginners, with step-by-step instruction.

Do I get materials and tools, or do I bring my own?

Each participant receives a six-inch square clear glass base, cutting tools, and supplies.

What happens after I break and arrange my glass design?

The studio fires your flat glass tile creation and has it ready for pickup or shipping later (in a few weeks).

What language is the class offered in?

The experience is offered in English.

Is cancellation possible if plans change?

Yes, you can cancel for a full refund up to 24 hours before the experience starts. If you cancel within 24 hours, the amount paid is not refunded.